Wall panels are the best solution if your main goal is the minimum cost and effort. They are easy to install, and the choice of colors and textures an unusually huge, from both natural and artificial materials. Today, the wall panels have gained considerable popularity and success among consumers, despite the fact that they appeared relatively recently in our market. So, what are they? If you want to know more about wall panels: types, sizes, properties, and advantages, you’ve stumbled on the right source.
Contents:
These are planks of 2400 – 3700 mm length and of a 125 – 300 mm width, their thickness is 8 to 12 mm. Such type is most in demand when covering small areas. It is a required crate of wood or metal for their installation. The panels fasten due to the presence of groove and tenon (or there are only slots and tabs that connect the two panels, but we’ll have a gap in such case). The panel fixes to the frame with staples or self-tapping screws (into the groove). For the manufacture of slatted typesetting pads often use chipboard, hardboard, PVC, and MDF.
Such panels are square-shaped, size is usually 30 x 30 to 98 x 98 cm. By the way, they are very usable to layout different figures, combining all sorts of shades and textures. Wall bracing for panels is usually produced by means of adhesive or capping, and they are fixed to each other using only grooves and the inserts in them. Chipboard, MDF, PVC, and MDF can also appear as the material for the manufacture of tile typesetting pads.
greatly facilitate the job of finishing walls by virtue of large sizes – from 1 22 to 2.44 m, with a thickness of 3 to 6 mm. The surface of these panels is a multilayer structure with the imitation of stone, wood, or tiles. Installation is performed using glue, and seams are hidden by moldings. For the manufacture of sheet metal wall panels producers often use impregnated with resins fiberboard.
In addition to the existing three main types of decorative wall panels, there are also designs for the construction of interior walls and different partitions. These include both the concrete panel and a sandwich panel for modular houses, in the form of ready-made walls with a heater and a moisture and vapor barrier inside. Sandwich panels are mainly applied for villas and country houses.
Most often made of oak, cedar, maple, or alder. It is ideal for housings, primarily due to its environmental friendliness. When installing such panels in rooms with high humidity (bathroom or kitchen), they should be chosen with a waxy coating panel, repelling water and dirt.
The manufacturing process is based on the method of hot pressing of chips and sawdust. It is similar to wood, but less strong, since it is subject to temperature drops and high level of humidity, and therefore only suitable for the finishing of dry areas.
Hardboard panels are also produced by hot pressing, but with the use of wood and other plant fibers. They are less prone to moisture, eco-friendly. However, they are not recommended for rooms with a high probability of direct hit water.
This comparatively new material, based on MDF boards by using dry pressing (press the fine wood shavings) at high temperature and pressure. The wood release lignin during heating. It serves as a connecting element. The material can withstand sufficient load (hanging lockers and shelves), and is resistant to moisture, has heat and sound insulation. It is hygienic, durable, in other words, it is rather qualitative. Moreover, there are even fire-resistant MDF types.
Glass panels are designed to create photographic images that require a durable base. Therefore they have several disadvantages. But careful operation can last quite a long time, especially since manufacturers are interested to apply modern technology, which has a positive effect on the strength and protection of the glass surface.
This material has overgrown the well-known gypsum board today. It is mostly used to build walls, partitions, and even ceilings. The new material is the same drywall with the only difference that it is covered with vinyl instead of cardboard. This obstacle differs it favorably from its predecessor. Panels are endowed with the finished working surface with a certain pattern, and they are quite durable and reliable.
It is the new design solution, facilitating the creation of your individual style. It is made of “fashion panels” and bamboo – a material that represents a new decorative range of sculptural textured panels, painted in different colors using acrylic paint (glossy or matte finish). Panels can create a stunning effect and turn the interior space into a spectacular one.
The plastic wall panels are also new material made of a rigid polyvinyl chloride with a minimum amount of plasticizer. The panels can be safely used for almost any room, even in the shower, because they have a number of advantages: water-resistance, fire-resistance, they are hygienic, long-life. Plastic panels are the most popular option among their “classmates”. This is due to several advantages. Let us examine it in more detail.
Panel thickness can be divided into two types – a 5 mm and 8,9,10 mm. The second subtype (size 8-10 mm) constitutes of moldings of the same size.
By using wall panels as a finishing material, it is possible to avoid such preliminary issues as the alignment of the walls, as well as removing old plaster, wallpaper, and paint, ie pre-finishing of the walls. In addition, the installation of wall panels does not require special skills and master qualification. All you need to have is a stapler, nails, sticks of wood, and, in fact, the panels themselves. In addition, the wall panels provide excellent room and sound insulation, masking of computer, telephone, and other electrical cables. They do not need special care. The only thing needed is to wipe them once a month with any detergent or just a damp cloth. Damaged components can be easily replaced if necessary. But usually, the wall panels have a long life. They are durable, hygienic, and resistant to mechanical stress – all this will eliminate the need for annual cosmetic repairs.
Investing in high-end ranges may significantly impact your property's value. In addition to improving the…
Dealing with a non-responsive thermostat can be a frustrating experience for homeowners, impacting both comfort…
A mini-split heat pump is a low-maintenance heating and cooling system that is very efficient…
Are you thinking about installing a Murphy bed in your home? If yes and you're…
Are you thinking about turning to solar power for your home? Sound familiar? You may…
Electrical issues are one of the most frustrating problems you could ever experience. They can…
This website uses cookies.
