Beautiful, stylish design and atmosphere of comfort, warmth is important for everyone. After all, at home, I want to feel as comfortable as possible. Contrary to popular belief, to create such an interior does not necessarily have a large budget. Every year, designers increasingly focus on the hand-made furniture. And today we will stop at the DIY Sofa made of wooden pallets. They are intended for transportation, but they are more often chosen to create diverse furniture for the home.
Contents:
As mentioned above, pallets are used for transportation as packaging material. They come in different sizes, but most often you can see standard and so called “Euro” pallets. By the way, it is on the last version that there is a marking on the ends, which will be a kind of decoration on your furniture. In addition, for the manufacture of such pallets used wood which can withstand loads up to 1000 kg. Therefore, you can be sure that this sofa does not break.
Before starting work, we recommend carrying out the basic preparation of pallets. First, you need to clean them from dirt and dust. This is especially true for items that were in use. A simple brush or a broom will fit this. But if the pollution is too strong, then boldly wash them with plain water. After that, you need to leave the pallets on the street until completely dry.
The next stage is a surface treatment to remove roughness and irregularities. A sanding machine is best for this. But if it is not available, then use sandpaper. Of course, it will take much more time, but the surface must necessarily be smooth. Also, remember that in the process you need to comply with safety, so use a protective mask.
If you plan to make furniture from pallets for the garden or backyard, then it must be protected from moisture. To do this, coat the entire surface with a primer with a water-repellent effect. Otherwise, wooden structures will quickly become gray and start to rot.
If you still want to try to make furniture from pallets, read on and you will learn about all the nuances that need to be taken into account in the work.
As you know, pallets have a small space between the boards. It is very convenient to use it for the storage of various things. Therefore, we propose to make an unusual sofa with drawers.
For work we need:
First of all, proceed to the preparation of all pallets, that is, clean and grind them. One of them will be the basis, so you can immediately attach the wheels to it.
The second pallet will be the back of the sofa, so we trim it, as shown in the photo.
The third pallet is divided in half. These will be the armrests.
Since the back and the main part of the sofa should be solid, fill the empty space between the boards with wooden blanks. Instead, you can use parts of pallets that have already been disassembled earlier.
With the help of screws attach the back to the main part of the sofa. Attach armrests to the sides of the future product. Cover the entire structure with a primer. After complete drying, apply a layer of paint and then acrylic lacquer and leave it to dry.
In the meantime, proceed to the creation of two drawers. For this, we use sheets of plywood and screws. Also attach the handle from the outside. If desired, make boxes for armrests.
Layout the seats and pillows on the sofa. As you can see, the result is a stylish piece of furniture that can is easily transportable.
If you want to make a small sofa in the hallway, then this is just the perfect option.
Necessary materials:
For a start, the pallet is sawn into two parts. This is to ensure that the sofa is not too wide. In this case, the narrower part will act as a back and a wide one as a seat.
We cut out the legs for the future sofa from the bars. It is very important that they are of the same size. It’s best to make them fairly wide for reliability.
The next step is to connect the two blanks together. To do this, use the corners, screws, and screwdriver.
We polish the surface of the sofa with a special grinding machine or use simple sandpaper for this.
Using a spatula, apply a primer and leave the sofa until completely dry.
Paint the surface with white paint.
We decorate the sofa with pillows at our discretion.
In the process, you will need the following:
First of all, we clean the surface of the pallets, process it with emery paper and finish with a primer. Only after that we apply white paint and leave it to dry completely.
We should saw wooden bars at an angle. That is what determines the degree of the backrest of the sofa.
Attach the bars to the pallet using a screwdriver, screws, and corners.
We process a sheet of plywood with sandpaper, apply a primer, as well as white paint. After complete drying, we fix it as a sofa back.
The result is a frame of the sofa, as shown in the photo.
We use small bars as legs and attach them to the sofa.
Cut the pieces of the required size out of the foam rubber. They will be used as seats and backs.
Wrap the foam with a piece of cloth and attach it to the sofa with the help of a construction stapler.
Repeat the same process with each foam rubber workpiece.
The result is an original corner sofa.
A sofa made of pallets is an excellent solution for those who love a stylish modern design of an apartment or house. This design will definitely not be ignored by your guests.
Investing in high-end ranges may significantly impact your property's value. In addition to improving the…
Dealing with a non-responsive thermostat can be a frustrating experience for homeowners, impacting both comfort…
A mini-split heat pump is a low-maintenance heating and cooling system that is very efficient…
Are you thinking about installing a Murphy bed in your home? If yes and you're…
Are you thinking about turning to solar power for your home? Sound familiar? You may…
Electrical issues are one of the most frustrating problems you could ever experience. They can…
This website uses cookies.
