Air Conditioning: Three Common Problems and Troubleshooting Tips

Summer is ending, and our air conditioning units have been running hard for several months. Eventually, something will go wrong over the last few weeks before you turn it off for fall. This is especially true if you’re living in Tucson, Arizona where residents always suffer from heat waves during summers.

As with any piece of equipment, air conditioners need constant care to maintain optimum efficiency. It is the air conditioners that haven’t been kept in top-notch shape that appear to suffer most in warm weather. To ensure you don’t sweat the next heatwave, below are the three most basic air conditioning issues you may have, and can fix on your own before calling for air conditioning repair Tucson Arizona.

Ac Is Not Turning On

If your AC doesn’t switch on, inspect your system outside to see if the unit’s condenser is still working. Plug the unit and configure the thermostat accurately. Decrease your thermostat by 5 to 10 degrees and check whether it solves your issue.  Set your thermostat to cool after.

Thermostats are complicated, but you can save money and time by scanning the handbook. Check if there’s a blown fuse or if the circuit breaker tripped. If your AC is still not turning on and your coil is still cold, you might have an issue in your compressor or motor. If this is the case, you might need air conditioning repair Tucson Arizona to fix your unit.

Thermostat Glitches

A poorly configured or dysfunctional thermostat might not let the air conditioning system to switch on. Older dial-type thermostat models are often susceptible to calibration concerns. However, newer configurable thermostats are not always simple to set up. If diagnosing air-conditioning, check your thermostat handbook to ensure that your thermostat is correctly calibrated.

Set your thermostat to the coldest temperature, and if the unit still doesn’t turn on, call your maintenance specialist. They might have to change the thermostat.

Inadequate Cooling

Once your air conditioner is installed correctly but doesn’t cool adequately, you might have a unit that’s not fit for the size of your space. The optimal device is expected to keep a 20 to 25 difference between the internal and external temperatures.

If the air conditioning unit can’t maintain the standard temperature on an average summer day, you might have an issue with a charge. The problem can also be a frozen evaporator coil, so if you can see icing on your external device, shut it down, and contact a specialist.

Troubleshooting Tips

• Inspect for filthy filters. Change dirty filters then check the ducts or damages and repair them if there are any.
• Examine the configuration of your thermostat. Install a programmable thermostat that lowers energy consumption and is more accurate.
• Test your circuit breakers for the air conditioning unit.
• Check the outdoor system. Remove the brushes and dust from the unit and the surrounding areas.
• Check all of the air vents. Walk around your house and ensure that all supply vents are open— even those in empty spaces.

Performing an air conditioning troubleshooting activity can counter many problems. Adequate monitoring is the key to avoiding trouble for everyone living in your household. A regular maintenance check can also prevent air-conditioning issues before they even begin.