Varieties of panels, their features, and disadvantages, easy installation, proper care, the service life – all these details are taken into account further in the article.
Content
These panels for walls are gypsum plates with a textured image to create an unusual interior in the room. Designers widely use these plates to realize their fantasies and ideas. The installation of the material is simple. If desired, you can create a cladding with your own hands.
There are many materials to construct volume surfaces. All of them differ in their properties, have their drawbacks. The most widespread materials for the panels:
Plaster decoration finishes one of the walls in the room. Basically, it is a blank wall in the living room, a partition with a TV, the head of the bed. If all the walls are glued with the material, then the room will become smaller and will “press” with its convex pattern.
Main characteristics of the finishing material:
Various textures, a relief image, ease of installation, and the ability to cover the material in different colors allow you to create a unique design in the room. However, there are disadvantages to consider:
Before you opt for 3D gypsum panels for wall decoration, you need to carefully consider their location and textured drawing.
The choice of drawing is a responsible matter. Some materials reduce space while others increase. The pattern can be bright. At the same time, it can tire eyes.
Facing is combined with other finishing materials:
Based on the information above, you can make a table:
Gypsum Material | Main Indicator | Differences |
Moisture Res. | Moderate moisture resistance. However, use in the bathroom is not recommended | Ease of restoration. To do this, use gypsum putty |
Soundproofing | Enhances sound insulation, thermal insulation | |
Temperature | If there are sudden changes in temperature, this does not affect the material | All wiring is laid under the finishing material |
Lifetime | If you conduct proper care of the finishing material and do not damage it mechanically it has a long service life | After finishing work, there are no joints that need to be covered with reinforcing tape |
Maintenance | Gypsum panels are well cleaned from dust | |
Weight | The plaster finish is relatively light. One plate 50 * 50 cm in size weights less than 5kg |
Gypsum tiles can be DIY installed. There are no difficulties with this. The main process is surface preparation:
Now you need to choose one of the ways of fixing the tiles: glue or crate.
On the construction market there is 3D cladding with such patterns:
The choice of cladding is large. Therefore, it must be treated responsibly. This will emphasize the individuality of the interior and decorate the room.
After measuring the surface for finishing, the following materials and tools are needed:
If you do the crate, the tool kit is slightly different: a screwdriver, dowel-nails, wooden battens or metal profiles, self-tapping screws.
For the durability of furnish, it is fixed by self-tapping screws.
The next tile is applied side by side (seamlessly) to the first one glued and evened so that the pattern matches.
For cutting gypsum use a hacksaw with small teeth. The cut side is sanded with sandpaper.
Holes for sconces and sockets are cut beforehand.
All plates have an allowance for the consumption of the pattern in millimeters; it is covered with putty and rubbed with sandpaper.
If the wall is lined starting from internal corners, then it is necessary to indent 3-5 mm from the corner so that cracks do not go when the building moves. And it also helps from sudden changes in temperature.
After facing and drying the adhesive mixture, it is necessary to cover all joints with putty. It should dry.
After drying, the seams are rubbed with sandpaper. The surface is coated with a primer, paint.
Observing all the phasing, the lining will pass quickly and easily.
To paint the lining, you need to choose paint – water-soluble or waterproof acrylic paint. The coloring should match the picture. That is, if these are bubbles, then they can be blue or rainbow, and the lining imitating wood is brown, cocoa with milk, and coffee tone in combination with a beige tone.
Paint is applied with a roller and brush. Monotony can be achieved with a spray gun. The varnish is applied to the top of the dried paint. It can be matte, glossy. The varnish will complement the picture and protect the panel from the subsidence of dust, active moisture.
The installation of 3D cladding resembles the assembly of a puzzle on the wall. This must be done carefully, slowly.
For a long service life, you must adhere to some tips:
Correct and timely looking after the panels will allow them to decorate the room for more than one year.
Panel’s life is approximately 50 years and more. However:
if there are frequent temperature changes that lead to increased humidity;
In this case, the service life is sharply reduced to 10-15 years or less.
3D textured gypsum wall panels decorate the room; make the interior of the room unusual. They are easy to mount with your own hands, painted in a color and pattern suitable for the interior. If the panels are regularly maintained, then they will be the decoration of the room for 50 years (or until you get bored and decide to change the atmosphere).
Investing in high-end ranges may significantly impact your property's value. In addition to improving the…
Dealing with a non-responsive thermostat can be a frustrating experience for homeowners, impacting both comfort…
A mini-split heat pump is a low-maintenance heating and cooling system that is very efficient…
Are you thinking about installing a Murphy bed in your home? If yes and you're…
Are you thinking about turning to solar power for your home? Sound familiar? You may…
Electrical issues are one of the most frustrating problems you could ever experience. They can…
This website uses cookies.